Skip header
ManualsContentsPreviousNextHelp

Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server 2008/2008 R2)

This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows Server 2008 /2008 R2 for use on the LPR port.

Important

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

    The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

  4. Click [PostScript 3 Printer Driver].

    Add Printer Wizard starts.

  5. Click [Add a local printer].

  6. Click [Create a new port:], and then click [LPR Port] in [Type of port:].

  7. Click [Next].

  8. Enter the machine's IP address in [Name or address of server providing lpd:].

  9. Enter "lp" in [Name of printer or print queue on that server:], and then click [OK].

  10. Check that the name of the machine whose driver you want to install is selected, and then click [Next].

  11. Change the machine name if you want, and then click [Next].

    If a check box for setting the machine as a default printer appears, configure as necessary.

    If the [Windows can't verify the publisher of this driver software] message appears, click [Install this driver software anyway].

  12. Specify whether or not to share the machine, and then click [Next].

  13. Specify whether or not to print a test page, and then click [Finish].

    If a check box for setting the machine as a default printer appears, configure as necessary.

    The printer driver installation starts.

Note