![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
Click [PCL Printer Driver].
The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
The PCL 6 printer driver is installed in the language specified by your operating system.
Click [Next >].
Select the machine model you want to use.
The machine name can be changed in the [Change settings for 'Printer Name'] box.
Double-click the machine name to display the printer settings.
The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, machine model, and port.
Click [Port], and then click [Add].
Click [SmartDeviceMonitor], and then click [OK].
Click [TCP/IP], and then click [Search].
A list of printers using TCP/IP appears.
Select the machine you want to use, and then click [OK].
Only machines that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the IP address or host name of the machine.
Check that the port of the selected printer is displayed in [Port].
Set a user code, if necessary.
Up to eight numeric characters can be entered. No alphabetic characters or symbols can be entered.
Select the [Default Printer] check box to configure the printer as default.
Click [Continue].
Installation starts.
Click [Finish].
Select one of the options to restart the computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.
A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See "Messages Displayed When Installing the Printer Driver", Troubleshooting.