![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Quit all applications currently running.
On the [Start] menu, click [Computer].
Click [Network].
Right-click the machine's icon, and then click [Install].
Driver installation starts automatically.
If the "Device driver software was not successfully installed" message appears, close the message, and then proceed to step 5.
On the [Start] menu, click [Devices and Printers].
Click [Add a printer].
Click [Add a local printer].
Check the [Use an existing port:] check box, and select WSD port.
Click [Next].
Click [Have Disk...].
Insert the CD-ROM into the CD-ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
Click [Browse...], and then specify a location for the printer driver.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
PCL 5e
32bit-driver
D:\X86\DRIVERS\PCL5E\XP_VISTA\(language)\DISK1
64bit-driver
D:\X64\DRIVERS\PCL5E\X64\(language)\DISK1
PCL 6
32bit-driver
D:\X86\DRIVERS\PCL6\XP_VISTA\MUI\DISK1
64bit-driver
D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
Click [OK] to close the [Install From Disk] window.
Select the manufacturer and model name of the machine you want to use, and then click [Next].
Follow the instructions on the screens.
According to your needs, you may change the machine name, configure the machine as a default printer and/or a shared printer, and print a test page.
Click [Finish].
If installation is successful, the icon of the printer connected to the WSD port is added to the [Devices and Printers] window.
The port name that follows "WSD" uses random character strings. It cannot be changed freely.
To stop installation of the selected driver, click [Cancel] before the installation is complete. When re-installing the WSD Port, right-click the machine's icon in the [Network] window, and then click [Uninstall].