![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes the user tools in the Tray Paper Settings menu under System Settings.
If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
Default: [Tray 1]
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
Default: [Tray 1]
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
Default: [Tray 1]
Tray Paper Size: Tray 1
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 1 are as follows:
[Auto Detect] ,A3, A4
, A4
, A5
, A5
, A6
, B4 JIS
, B5 JIS
, B5 JIS
, B6 JIS
,
C5 Env, C5 Env
, C6 Env
, DL Env
,
11 × 17, 11 × 15
, 11 × 14
, 10 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
,
81/2 × 11, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
,
8 × 101/2, 8 × 10
, 8 × 10
, 71/4 × 101/2
, 71/4 × 101/2
,
51/2 × 81/2, 41/8 × 91/2
, 37/8 × 71/2
,
8K, 16K
, 16K
, [Custom Size]
Default: [Auto Detect]
You can specify a custom size of between 100.0 - 297.0 mm (3.94 - 11.69 inch) vertically, and between 148.0 - 432.0 mm (5.83 - 17.00 inch) horizontally.
For details about auto detect paper size, see About This Machine.
Tray Paper Size: Tray 2
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 2 are as follows:
[Auto Detect], A3, A4
, A4
, A5
, B4 JIS
, B5 JIS
, B5 JIS
,
11 × 17, 11 × 15
, 11 × 14
, 10 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
,
81/2 × 11, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
,
8 × 101/2, 8 × 10
, 8 × 10
, 71/4 × 101/2
, 71/4 × 101/2
,
8K, 16K
, 16K
, [Custom Size]
Default: [Auto Detect]
You can specify a custom size of between 182.0 - 297.0 mm (7.17 - 11.69 inch) vertically, and between 148.0 - 432.0 mm (5.83 - 17.00 inch) horizontally.
For details about auto detect paper size, see About This Machine.
Tray Paper Size: Tray 3-4 (when the lower paper trays are installed.)
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 3 - 4 are as follows:
[Auto Detect], A3, A4
, A4
, A5
, B4 JIS
, B5 JIS
, B5 JIS
,
11 × 17, 11 × 15
, 11 × 14
, 10 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
,
81/2 × 11, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
,
8 × 101/2, 8 × 10
, 8 × 10
, 71/4 × 101/2
, 71/4 × 101/2
,
8K, 16K
, 16K
, [Custom Size]
Default: [Auto Detect]
You can specify a custom size of between 182.0 - 297.0 mm (7.17 - 11.69 inch) vertically, and between 148.0 - 432.0 mm (5.83 - 17.00 inch) horizontally.
For details about auto detect paper size, see About This Machine.
Tray Paper Size: Tray 3 (when the lower paper tray is installed.)
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 3 are as follows:
[Auto Detect], A3, A4
, A4
, A5
, B4 JIS
, B5 JIS
, B5 JIS
,
11 × 17, 11 × 15
, 11 × 14
, 10 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
,
81/2 × 11, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
,
8 × 101/2, 8 × 10
, 8 × 10
, 71/4 × 101/2
, 71/4 × 101/2
,
8K, 16K
, 16K
, [Custom Size]
Default: [Auto Detect]
You can specify a custom size of between 182.0 - 297.0 mm (7.17 - 11.69 inch) vertically, and between 148.0 - 432.0 mm (5.83 - 17.00 inch) horizontally.
For details about auto detect paper size, see About This Machine.
Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the computer.
The paper sizes you can set for bypass tray are as follows:
[Auto Detect], A3, A4
, A4
, A5
, A5
, A6
, B4 JIS
, B5 JIS
,
B5 JIS, B6 JIS
, C5 Env
, C5 Env
, C6 Env
, DL Env
, 12 × 18
,
11 × 17, 11 × 15
, 11 × 14
, 10 × 14
, 81/2 × 14
, 81/2 × 13
,
81/2 × 11, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
,
8 × 10, 8 × 10
, 71/4 × 101/2
, 71/4 × 101/2
,
51/2 × 81/2, 41/8 × 91/2
, 37/8 × 71/2
,
8K, 16K
, 16K
, [Custom Size]
Default: [Auto Detect]
For details about auto detect paper size, see About This Machine.
You can specify a custom size of between 90.0 - 305.0 mm (3.55 - 12.00 inch) vertically, and between 148.0 - 600.0 mm (5.83 - 23.62 inch) horizontally.
To allow users to specify a horizontal dimension of 600 - 1260 mm (23.62 - 49.6 inch) in "Custom Size", other settings must first be specified. For details about specifying custom paper sizes, contact your sales or service representative.
Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
[Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Label Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [OHP (Transparency)], [Thick Paper], [Middle Thick], [Thin Paper], [Special Paper], [Envelope]
The paper thicknesses you can set for the bypass tray are as follows:
[Thin Paper] (52 - 59 g/m2, 14 - 15 lb.Bond)
[Plain Paper] (60 - 81 g/m2, 16 - 20 lb.Bond)
[Middle Thick] (82 - 105 g/m2, 21 - 28 lb.Bond)
[Thick Paper] (106 - 157 g/m2, 28 lb. Bond - 42 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper]
Default for "Apply Duplex": [Yes]
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 1
Sets the display so you can see what type of paper is loaded in the paper tray 1.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 1 are as follows:
[Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Label Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [OHP (Transparency)], [Thick Paper], [Middle Thick], [Thin Paper], [Special Paper], [Envelope]
The paper thicknesses you can set for the paper tray 1 are as follows:
[Thin Paper] (52 - 59 g/m2, 14 - 15 lb.Bond)
[Plain Paper] (60 - 81 g/m2, 16 - 20 lb.Bond)
[Middle Thick] (82 - 105 g/m2, 21 - 28 lb.Bond)
[Thick Paper] (106 - 157 g/m2, 28 lb. Bond - 42 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 2
Sets the display so you can see what type of paper is loaded in the paper tray 2.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 2 are as follows:
[Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Thick Paper], [Middle Thick], [Thin Paper], [Special Paper]
The paper thicknesses you can set for the paper tray 2 are as follows:
[Thin Paper] (52 - 59 g/m2, 14 - 15 lb.Bond)
[Plain Paper] (60 - 81 g/m2, 16 - 20 lb.Bond)
[Middle Thick] (82 - 105 g/m2, 21 - 28 lb.Bond)
[Thick Paper] (106 - 157 g/m2, 28 lb. Bond - 42 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 3 - 4 (when the lower paper trays are installed.)
Sets the display so you can see what type of paper is loaded in the paper tray 3 - 4.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 3 - 4 are as follows:
[Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Thick Paper], [Middle Thick], [Thin Paper], [Special Paper]
The paper thicknesses you can set for the paper tray 3 - 4 are as follows:
[Thin Paper] (52 - 59 g/m2, 14 - 15 lb.Bond)
[Plain Paper] (60 - 81 g/m2, 16 - 20 lb.Bond)
[Middle Thick] (82 - 105 g/m2, 21 - 28 lb.Bond)
[Thick Paper] (106 - 157 g/m2, 28 lb. Bond - 42 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 3 (When the paper tray 3 (LCT) is installed.)
Sets the display so you can see what type of paper is loaded in the paper tray 3 (LCT).
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 3 (LCT) are as follows:
[Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Thick Paper], [Middle Thick], [Thin Paper], [Special Paper]
The paper thicknesses you can set for the paper tray 3 are as follows:
[Thin Paper] (52 - 59 g/m2, 14 - 15 lb.Bond)
[Plain Paper] (60 - 81 g/m2, 16 - 20 lb.Bond)
[Middle Thick] (82 - 105 g/m2, 21 - 28 lb.Bond)
[Thick Paper] (106 - 157 g/m2, 28 lb. Bond - 42 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [No]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Paper Type: Tray 3 (when the lower paper tray is installed.)
Sets the display so you can see what type of paper is loaded in the paper tray 3.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 3 are as follows:
[Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Thick Paper], [Middle Thick], [Thin Paper], [Special Paper]
The paper thicknesses you can set for the paper tray 3 are as follows:
[Thin Paper] (52 - 59 g/m2, 14 - 15 lb.Bond)
[Plain Paper] (60 - 81 g/m2, 16 - 20 lb.Bond)
[Middle Thick] (82 - 105 g/m2, 21 - 28 lb.Bond)
[Thick Paper] (106 - 157 g/m2, 28 lb. Bond - 42 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
Cover Sheet Tray
You can specify and display the paper tray that is used to set front cover sheets.
After selecting the paper tray, you can also specify the display timing and copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, front cover sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
Slip Sheet Tray
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
The paper types you can set for this machine are [Plain Paper 1] and [Plain Paper 2]. The default setting is [Plain Paper 2]. For details about setting the paper type, see "Changing Paper Thickness Settings", About This machine.
The settings configured pressing [Thin Paper] ([Middle Thick] or [Thick Paper]) in "Paper Type" and those configured pressing both [Do not Display] in "Paper Type" and [Thin Paper] ([Middle Thick] or [Thick Paper]) in "Paper Thickness" will be the same. Also, [Thin Paper] ([Middle Thick] or [Thick Paper]) will be displayed on the initial screen of the copier or printer.
If you configure the paper settings after selecting [Thin Paper] ([Middle Thick] or [Thick Paper]) in "Paper Type", [Do not Display] in "Paper Type" and [Thin Paper] ([Middle Thick] or [Thick Paper]) in "Paper Thickness" will be displayed.
For details on how to access System Settings, see "Accessing User Tools".