Skip header
 

Top Page > Network and System Settings Reference > Connecting the Machine > Connecting to the Interface > Connecting a Device to the Machine's USB Host Interface

Connecting a Device to the Machine's USB Host Interface

This section explains how to connect a device to the machine's USB host interface.

1Connect one end of the USB interface device to the machine's USB host interface.

illustration of connecting the USB interfece cable

If you are using a USB interface cable, connect the other end of it to a card authentication device or media slot.

Note

  • Use the following 5 meter (197 inch) cable which supports USB Host Interface.

  • This machine does not come with a USB interface cable. Make sure you purchase the appropriate cable for the machine (connector shape).

  • Do not remove the Bluetooth interface unit after it has been installed and the power has been turned on.