![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section provides explanations about external options.
Media slot
With this media slot, you can save scan files on a removable memory device. You can also print files stored on a removable memory device.
Exposure glass cover
Lower this cover over originals.
ADF
Load a stack of originals here. They will feed in automatically.
Handset
Used as a receiver when a fax unit is installed.
Lower paper tray
Holds up to 550 sheets of paper.
Lower paper trays
Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.
Large capacity tray (LCT)
Holds up to 2,000 sheets of paper.
Internal tray 2
If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
Bridge Unit
Relays paper to the finisher.
Internal shift tray
Sorts and stacks multiple sheets of paper.
Internal finisher
Sorts, stacks, and staples multiple sheets of paper.
Copies can be punched if the optional punch unit is installed on the finisher.
Booklet finisher
Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Finisher booklet tray
1000-sheet finisher
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
500-sheet finisher
Sorts, stacks, and staples multiple sheets of paper.