Replacing Toner
This section describes how to replace toner.
Do not shake the toner cartridge with its mouth down after removing it. Residual toner may scatter.
Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
Open the front cover of the machine.
Raise the toner holder lever.
Push the lever, and then gently pull out the holder.
Push the toner cartridge back to raise its top, and then gently pull out the cartridge.
Take the new toner cartridge out of the box.
Hold the new cartridge horizontally and shake it from side to side five or six times.
Remove the outer cap of the toner cartridge.
Put the toner cartridge on the holder, and then pull its top forward.
Push in the toner holder until the lever clicks, and lower the toner holder lever back into its original position.
Close the front cover of the machine.
