Skip header
 

Programming/Changing Special Senders

This section describes how to program and change Special Senders.

1Press [Facsimile Features].

2Press [Reception Settings].

3Press [Program Special Sender].

4Check that [Program / Change] is selected.

5Select the sender to program or change.

To program new sender, press [Not Programmed].

Operation panel screen illustration

6Enter a sender name, and then press [OK].

Enter a destination name using Own Name or Own Fax Number.

7Press [Full Agreement] or [Partial Agreement].

Operation panel screen illustration

8Select the item you want to program.

Operation panel screen illustration

You must select only the item you want to program.

To cancel these settings, press [Cancel]. The display returns to that of step 5.

9Press [OK].

A Special Sender is programmed.

To program another sender, repeat the procedure from step 5.

10Press [Exit].

11Press the [User Tools/Counter] key.

Note

  • To specify Authorized Reception, see “Authorized Reception per Sender”.

  • To specify Reception File Print Qty, see “Reception File Print Qty per Sender”.

  • To specify Forwarding, see “Forwarding per Sender”.

  • To specify print 2 sided, see “Print 2 Sided per Sender”.

  • To specify Memory Lock, see “Memory Lock per Sender”.

  • To specify paper tray, see “Paper Tray per Sender”.