![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes the user tools in the Page Numbering menu under Stamp.
Stamp Format
You can select the page number format given priority when [Page Numbering] is pressed.
Default: [P1,P2...]
Font
You can select the font in Page Numbering mode.
Default: [Font 1]
Size
You can set the size of the stamp printed in Page Numbering mode.
Default: [Auto]
Duplex Back Page Stamping Position
You can set the position of the duplex back page number printed in Duplex mode.
Default: [Opposite Position]
Page Numbering in Combine
You can set page numbering when using the Combine function and the Page Numbering function together.
Default: [Per Original]
Stamp on Designating Slip Sheet
You can select whether or not to print the page number onto slip sheets when using the Designate function set to “Copy” and the Page Numbering function together.
Default: [Off]
Stamp Position
Specify how each of stamps is printed.
Stamp Position
Specify where to print the stamp.
Default for the patterns of “P1,P2...”, “1/5,2/5...”, “P.1,P.2...”, and “1,2...”: [Top Right]
Default for the patterns of “-1-,-2-...” and “1-1,1-2...”: [Bottom Centre]
Adjust Stamp Position
You can adjust the position of the stamp within the available ranges shown below.
(mainly Europe and Asia)
“Top Left” T/B: 4 144 mm, L/R: 4
144 mm
“Top Centre” T/B: 4 144 mm, L/R: 72
72 mm
“Top Right” T/B: 4 144 mm, L/R: 4
144 mm
“Bottom Left” T/B: 4 144 mm, L/R: 4
144 mm
“Bottom Centre” T/B: 4 144 mm, L/R: 72
72 mm
“Bottom Right” T/B: 4 144 mm, L/R: 4
144 mm
(mainly North America)
“Top Left” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
“Top Center” T/B: 0.1 5.7 inches, L/R: 2.8
2.8 inches
“Top Right” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
“Bottom Left” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
“Bottom Center” T/B: 0.1 5.7 inches, L/R: 2.8
2.8 inches
“Bottom Right” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
Superimpose
You can have page numbers printed in white when they overlap black parts of the image.
Default: [Off]
Page Numbering Initial Letter
You can select the page numbering initial letter between “P1,P2.../P.1,P.2...” and “S1,S2.../S.1,S.2...”.
Default: [P1,P2.../P.1,P.2...]