![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes the user tools in the Preset Stamp menu under Stamp.
Stamp Language
You can select the language of the message printed in Stamp mode.
English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish
Default: [English]
Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
Default: [COPY]
Stamp Format
Specify how each of stamps is printed.
Stamp Position
Specify where to print the stamp.
Default: [Top Right]
Adjust Stamp Position
You can adjust the print position of the stamp within the available ranges shown below.
(mainly Europe and Asia)
“Top Left” T/B: 4 144 mm, L/R: 4
144 mm
“Top Centre” T/B: 4 144 mm, L/R: 72
72 mm
“Top Right” T/B: 4 144 mm, L/R: 4
144 mm
“Centre Left” T/B: 72 72 mm, L/R: 4
144 mm
“Centre” T/B: 72 72 mm, L/R: 72
72 mm
“Centre Right” T/B: 72 72 mm, L/R: 4
144 mm
“Bottom Left” T/B: 4 144 mm, L/R: 4
144 mm
“Bottom Centre” T/B: 4 144 mm, L/R: 72
72 mm
“Bottom Right” T/B: 4 144 mm, L/R: 4
144 mm
(mainly North America)
“Top Left” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
“Top Center” T/B: 0.1 5.7 inches, L/R: 2.8
2.8 inches
“Top Right” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
“Center Left” T/B: 2.8 2.8 inches, L/R: 0.1
5.7 inches
“Center” T/B: 2.8 2.8 inches, L/R: 2.8
2.8 inches
“Center Right” T/B: 2.8 2.8 inches, L/R: 0.1
5.7 inches
“Bottom Left” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
“Bottom Center” T/B: 0.1 5.7 inches, L/R: 2.8
2.8 inches
“Bottom Right” T/B: 0.1 5.7 inches, L/R: 0.1
5.7 inches
Size
You can set the size of the stamp.
Default: [1 X]
Density
You can set the pattern used to print the stamp.
Default: [Normal]
Normal
The stamp is printed on the image. You cannot check which parts will overlap.
Lighter
The image can be seen through the stamp.
Lightest
The image appears even clearer than in the Lighter setting.
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]