![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
If the orientation in which your original is placed is different from that of the paper you are copying onto, the machine rotates the original image by 90 degrees to fit it on the paper.
You cannot use Rotate Copy when enlarging onto A3, B4 JIS, 11 × 17, or 81/2 × 14 size paper. In this case, place your original in the orientation.
Original size and orientation |
Copy paper size and orientation |
||||
---|---|---|---|---|---|
You cannot rotate: |
A4, B5 JIS, A5, 81/2 × 11, or 51/2 × 11 |
When enlarging to |
B4 JIS, A3, 81/2 × 14, or 11 × 17 |
||
However, you can use: |
A4, B5 JIS, 81/2 × 11, or 51/2 × 11 |
When enlarging to |
B4 JIS, A3, 81/2 × 14, or 11 × 17 |
This function works when Auto Paper Select or Auto Reduce / Enlarge is selected. See “Auto Paper Select” and “Auto Reduce / Enlarge”.
The default setting for Auto Tray Switching is [With Image Rotation]. You cannot use the Rotate Copy function if this setting is changed to [Without Image Rotation] or [Off]. For details about Auto Tray Switching, see “General Features”.
The Rotate Copy function is not available in combination with certain finishing settings.