![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
The machine assembles copies as sets in sequential order.
To use the Rotate Sort function, two paper trays loaded with paper of the same size and type, but in different orientation () are required. See “System Settings”, Network and System Settings Reference.
You cannot use the bypass tray with Rotate Sort.
Sort/Shift Sort
Copies are assembled as sets in sequential order.
To use Shift Sort, a finisher or the internal shift tray is required. Each time the copies of one set or a job are delivered, the next copy is shifted to separate each set or job.
Rotate Sort
Every other copy set is rotated by 90 degrees () and delivered to the copy tray.
Press [Finishing].
Select [Sort] or [Rotate Sort].
When the finisher is not attached:
When the internal finisher is attached:
When the 500-sheet finisher is attached:
When the 1000-sheet finisher is attached:
When the booklet finisher is attached:
Press [OK].
Enter the number of copy sets using the number keys.
Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
Press the [Start] key.
If you are copying from the exposure glass, a single copy of each original is made first. If the first copy set is acceptable, you can make the remaining copy sets by pressing the [] key. The time required for copy sets to be delivered varies depending on the print settings.
When placing originals on the exposure glass, start with the first page to be copied. When placing originals in the ADF, set so that the first page is on the top.
When placing originals on the exposure glass, or in the ADF using Batch mode, press the [] key after all the originals have been scanned.
You can change the settings for the Sort function under Input / Output in User Tools. For details, see “Input / Output”.
Paper sizes and orientations that can be shifted when delivered to the shift tray are as follows:
Internal shift tray
Standard size
A3, A4
, A5
, A6
, B4 JIS
, B5 JIS
, B6 JIS
, 12 × 18
, 11 × 17
, 11 × 15
, 11 × 14
, 10 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
,
81/2 × 11, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 101/2
, 8 × 10
, 71/4 × 101/2
, 51/2 × 81/2
, 41/8 × 91/2
, 37/8 × 71/2
, C5 Env
,
C6 Env, DL Env
, 8K
, 16K
Custom size
Horizontal size: 148.0 600.0 mm (5.83
23.62 inches), Vertical size: 90.0
305.0 mm (3.55
12.00 inches)
Finisher shift tray for the internal finisher
Standard size
A3, A4
, B4 JIS
, B5 JIS
, 11 × 17
, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 13
, 71/4 × 101/2
, 8K
, 16K
Finisher shift tray for the 500-sheet finisher
Standard size
A3, A4
, B4 JIS
, B5 JIS
, 11 × 17
, 11 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 10
, 71/4 × 101/2
, 8K
Finisher shift tray for the 1000-sheet finisher and booklet finisher
Standard size
A3, A4
, B4 JIS
, B5 JIS
, 11 × 17
, 11 × 15
, 10 × 14
, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 10
, 71/4 × 101/2
, 8K
Paper sizes and orientations that can be used in the Rotate Sort function are as follows:
A4, B5 JIS
, A5
, 81/2 × 11
, 8 × 101/2
, 8 × 10
, 71/4 × 101/2
, 16K
When the number of copies exceeds capacity, copying stops. If this happens, remove copies from the tray to resume copying. For details about the number of copy sheets that the output tray can accommodate, see “Appendix”, About This Machine.