Skip header
 

Original Orientation

You can specify the original orientation if necessary.

When using the exposure glass, place the original face down. When using the ADF, place it face up.

Illustration of original orientation

  1. ADF

  2. Exposure glass

When you cannot place the original as the above, you may not make copies as you want with particular functions. If this happens, change the orientation by selecting the unreadable orientation.

1Press [Special Original].

Operation panel screen illustration

2Select the original orientation, and then press [OK].

Operation panel screen illustration

Note

  • It is recommended that you use this function together with the Auto Paper Select or Auto Reduce / Enlarge function.