Skip header
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Appendix > Transmission Using IPsec > Enabling and Disabling IPsec Using the Control Panel

Enabling and Disabling IPsec Using the Control Panel

  1. Press the [Menu] key.

  2. Press the [Up arrow key][Down arrow key] keys to select [Host Interface], and then press the [OK] key.

  3. Press the [Up arrow key][Down arrow key] keys to select [Network Setting], and then press the [OK] key.

  4. Press the [Up arrow key][Down arrow key] keys to select [IPsec], and then press the [OK] key.

  5. Press the [Up arrow key][Down arrow key] keys to select [On] or [Off], and then press the [OK] key.

  6. Press the [Menu] key to return to the initial screen.

Note

TopPreviousNext
Copyright (C) 2011