Using Web Image Monitor
Using Web Image Monitor, you can check the printer status and change settings.
Available operations
The following operations can be remotely performed using Web Image Monitor on a computer:
Displaying the printer's status or settings
Configuring the printer's settings
Configuring the user restriction settings
Configuring the network settings
Configuring the IPsec settings
Printing reports
Setting the administrator password
Resetting the printer's configuration to the factory default
Creating backup files of the printer's configuration
Restoring the printer's configuration from backup files
Configuring the printer's Energy Saver mode setting
Configuring the printer
To perform the operations from Web Image Monitor, TCP/IP is required.
After the printer is configured to use TCP/IP, operations from Web Image Monitor become available.
Recommended Web browser
Internet Explorer 6 or later
Firefox 3.0 or later
Safari 3.0 or later
If the previous versions of the Web browser above are used or JavaScript and cookies are not enabled with the Web browser used, display and operation problems may occur.
If you are using a proxy server, change the Web browser settings. Contact your network administrator for information about the settings.
The previous page may not appear even after the back button of the Web browser is clicked. If this happens, click the refresh button of the Web browser.
Updating the printer information is not automatically performed. Click [Refresh] in the main area to update the printer information.
We recommend using Web Image Monitor in the same network.
When using the printer under DHCP, the IP address may be automatically changed by the DHCP server settings.
If the HTTP port is disabled, connection to the printer using the printer's URL cannot be established.
