Changing the Host Interface Menu

Press the [Menu] key.

The menu screen appears.

Press the [][] keys to select [Host Interface], and then press the [OK] key.

Press the [][] keys to select [Network Setting], and then press the [OK] key.

Press the [][] keys to select [IPv4 Config.], and then press the [OK] key.

Press the [][] keys to select [DHCP], and then press the [OK] key.

Press the [][] keys to select [Active] or [Inactive] according to the network environment, and then press the [OK] key.

If you select [Active], proceed to step 10.

Press the [][] keys to select [IP Address], and then press the [OK] key.

Specify the printer’s IPv4 address using [][] keys, and then press the [OK] key.

• To go to the next field, press the [OK] key.

• To go back to the previous field, press the [Escape] key.

Set the subnet mask and gateway address.

Set values for each setting following the same procedure as for the IPv4 address.

Press the [Menu] key to return to the initial screen.