Skip header
 

Top Page > Software Guide > Other Print Operations > Printing Confidential Documents > Storing a Locked Print File

Storing a Locked Print File

This section describes how to store a Locked Print file in the printer using the printer driver.

1Open the file you want to print on your computer.

2Open the printer driver's properties.

3Click the [Setup] tab, and then select [Locked Print].

The [User ID:] and [Password:] text boxes become available.

The [User ID:] text box contains the login user name of your computer account or the user ID that you used for the previous Locked Print job.

4Type the password (containing 4 to 8 digits) and user ID (containing 1 to 9 alphanumeric characters), and then click [OK].

The user ID will be used to identify your Locked Print file on the printer's control panel.

5Execute a print command.

The print job is stored in the printer as a Locked Print file. You can print the file by entering the password using the control panel.

Note

  • The Locked Print file is automatically erased from the printer's memory when it is printed out, or when the printer's power is turned off.

  • The printer can store a maximum of 5 jobs or 5 MB of Locked Print data at a time.

  • Even if the printer cannot store any more Locked Print files, the printer holds a new Locked Print file for the period of time specified in [Timeout:LockPrt] under [Host Interface] before canceling the job. Within this time, you can print or delete the new Locked Print file. You can also print or delete an existing Locked Print file so that the new Locked Print file can be stored in the printer.

  • When a Locked Print job is canceled, the printer automatically records the cancellation in a log. You can use this log to identify which Locked Print jobs have been canceled.

Reference