Loading Paper

Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper misfeed.

Do not load OHP transparencies. Load translucent media only.

Set the paper as described below

• Tray 1: Print side facing up

• Paper Feed Unit (Tray 2): Print side facing up

• Bypass Tray: Print side facing down

Print quality cannot be guaranteed if paper other than the ones recommended is used. For more information about recommended paper, contact your sales or service representative.

Do not use paper that has already been printed onto by other printers.

When loading the paper, take care not to touch the surface of the paper.

Do not use dirty or damaged paper.

Specify the paper size and type using control panel.

The remaining paper indicator on the right front side of the paper tray shows approximately how much paper is remaining.