Skip header
 

Top Page > Hardware Guide > Appendix > Moving and Transporting the Printer

Moving and Transporting the Printer

CAUTION

  • If you have to move the machine when the optional paper tray unit is attached, do not push on the main unit's top section. Doing so can cause the optional paper tray unit to detach, possibly resulting in injury.

CAUTION

  • The printer weighs approximately 23.8 kg (52.5 lb.). When moving the printer, use the inset grips on both sides, and lift slowly in pairs. The printer will break or cause injury if dropped.

CAUTION

  • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

CAUTION

  • When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.

CAUTION

  • When moving the printer after use, do not take out any of the toners, nor the waste toner bottle to prevent toner spill inside the machine.

Repack the printer in its original packing materials for transporting.

Important

  • Be sure to disconnect all cables from the printer before transporting it.

  • The printer is a precision piece of machinery. Be sure to handle it carefully when moving it.

  • Make sure to move the printer horizontally. Take extra caution when carrying the printer up or down stairs.

  • If Tray 2 is installed, remove it from the printer, and then move them separately.

  • Do not grip on the tray area when lifting the printer.

Related topics

Moving the Printer