Skip header
 

Specifying custom size paper for the bypass tray

Important

  • When you specify a custom size paper and specify the bypass tray as the input tray on the printer driver, and perform printing with [Bypass Priority] set to [Any Custom S/T] under [Paper Input] on the control panel, the printer ignores the paper type and size settings made on the control panel. Printing is performed with the settings made on the printer driver.

  • If you set [Bypass Priority] to [Machine Setting] under [Paper Input], paper size settings made on the printer driver must match those made on the control panel. If they do not match, an error message appears and printing stops if [Auto Continue] is not set to [On] under [System].

  • When loading custom size or special paper, specify the paper size using the control panel or printer driver.

  • You cannot print on custom size paper with an application that does not support the custom size setting.

  • Paper sizes between 90 - 216 mm (3.54 - 8.5 inches) in width and 148 - 356 mm (5.83 - 14 inches) in length can be loaded in the bypass tray.

1Press the [Menu] key.

Menu key illustration

2Press the [Up arrow key] or [Down arrow key] key to display [Paper Input], and then press the [OK] key.

Menu:               
Paper Input         

3Press the [Up arrow key] or [Down arrow key] key to display [Paper Size], and then press the [OK] key.

Paper Input:        
Paper Size          

4Press the [Up arrow key] or [Down arrow key] key to display [Bypass Tray], and then press the [OK] key.

Paper Size:         
Bypass Tray         

5Press the [Up arrow key] or [Down arrow key] key to display [Custom Size], and then press the [OK] key.

Bypass Ppr Size:    
Custom Size         

6Press the [Up arrow key] or [Down arrow key] key to select a unit, and then press the [OK] key.

Custom Size:        
mm                  

7Press the [Up arrow key] or [Down arrow key] key to enter the horizontal value, and then press the [OK] key.

Custom Size:        
Horiz. 216.0 mm     

8Press the [Up arrow key] or [Down arrow key] key to enter the vertical value, and then press the [OK] key.

Custom Size:        
Vert. 356.0 mm      

9Press the [Menu] key.

Reference

  • For details about the printer driver, see the printer driver Help.