Skip header
 

Top Page > Hardware Guide > Guide to the Printer > Control Panel

Control Panel

Control panel numbered callout illustration

  1. [Stop/Start] key

    If you press this key, the printer stops receiving data, and printing is not possible.

  2. [Job Reset] key

    Press this key to cancel a job that is printing out.

  3. [Menu] key

    Press this key to make and check the current printer settings.

    Press the [Menu] key again to return to the ready condition.

  4. Display

    Displays current printer status and error message.

  5. [Escape] key

    Press this key to cancel an operation or to return to the previous display.

  6. [OK] key

    Press this key to confirm settings and setting values, or move to the next menu level.

  7. Scroll Keys

    Press to move the cursor in each direction, step by step.

  8. Data In Indicator

    Flashes when the printer is receiving data from a computer. The data indicator is lit if there is data to be printed.

  9. Alert Indicator

    Lights up in red whenever printer error occurs. Use display to check the error. Flashes in yellow when toner is nearly empty.

  10. Power Indicator

    Remains lit while the power is on. It is unlit when the power is off.

Note

  • The actual control panel may look different from the illustration, depending on the country of use or model type.