Hold Print
Use this function to temporarily hold a file in the machine, and print it from the computer or the control panel later.
A Hold Print file cannot be stored if:
the total number of Sample Print, Locked Print, Hold Print, and Stored Print files in the machine is over 100. (The maximum number varies depending on the volume of data in files.)
the file contains over 2,000 pages.
the machine's sent or stored files total over 9,000 black-and-white pages. (The total varies depending on the size of the files.)
The PostScript 3 printer driver is also available for this machine.
If a Hold Print file has not been stored properly, check the error log on the control panel. For details about the error log on the control panel, see "Checking the Error Log".
Even after you turn off the machine, stored documents in the machine remain. However, the [Auto Delete Temporary Print Jobs] or [Auto Delete Stored Print Jobs] settings are applied first. For details about the auto delete settings, see "System".
Make sure the [Ignore Application Collate] check box in the printer driver and the collate settings in the application's [Print] dialog box are both cleared if you are using the PCL 5e printer driver. Make sure [Application Collate] is selected and the collate settings in the application's [Print] dialog box are cleared in case of the PCL 6 printer driver. By default, Hold Print jobs are automatically collated by the printer driver. If collate is enabled in the application, more prints than intended may be produced.
