Skip header
Help
 

Setting Items of IEEE 802.1X for Ethernet

1Log in to Web Image Monitor in the administrator mode.

2In the menu area, click [Configuration].

3Under "Security", click [IEEE 802.1X].

4In "User Name", enter the user name set in the RADIUS server.

5Enter the domain name in "Domain Name".

6Select "EAP Type". Configurations differ according to the EAP Type.

EAP-TLS

  • Make the following settings according to the operating system you are using:

    • Select [On] or [Off] in "Authenticate Server Certificate".

    • Select [On] or [Off] in "Trust Intermediate Certificate Authority".

    • Enter the host name of the RADIUS server on "Server ID".

    • Select [On] or [Off] in "Permit Sub-domain".

LEAP

  • Click [Change] in "Password", and then enter the password set in the RADIUS server.

EAP-TTLS

  • Click [Change] in "Password", and then enter the password set in the RADIUS server.

  • Click [Change] in "Phase 2 User Name", and then enter the user name set in the RADIUS server.

  • Select [CHAP], [MSCHAP], [MSCHAPv2], [PAP], or [MD5] in "Phase 2 Method".

    Certain methods might not be available, depending on the RADIUS server you want to use.

  • Make the following settings according to the operating system you are using:

    • Select [On] or [Off] in "Authenticate Server Certificate".

    • Select [On] or [Off] in "Trust Intermediate Certificate Authority".

    • Enter the host name of the RADIUS server in "Server ID".

    • Select [On] or [Off] in "Permit Sub-domain".

PEAP

  • Click [Change] in "Password", and then enter the password set in the RADIUS server.

    If [TLS] is selected for "Phase 2 Method", you do not need to specify a password.

  • Click [Change] on "Phase 2 User Name", and then enter the user name set in the RADIUS server.

  • Select [MSCHAPv2] or [TLS] in "Phase 2 Method".

    When you select [TLS], you must install "IEEE 802.1X Client Certificate".

  • Make the following settings according to the operating system you are using:

    • Select [On] or [Off] in "Authenticate Server Certificate".

    • Select [On] or [Off] in "Trust Intermediate Certificate Authority".

    • Enter the host name of the RADIUS server on "Server ID".

    • Select [On] or [Off] in "Permit Sub-domain".

7Click [OK].

8“Updating...” appears. Wait for about one or two minutes, and then click [OK].

9In the menu area, click [Configuration].

10Under "Interface", click [Interface Settings].

11Select [Active] in "Ethernet Security".

12Click [OK].

13“Updating...” appears. Wait for about one or two minutes, and then click [OK].

14Click [Logout].

15Quit the Web Image Monitor.

Note

  • If there is a problem with settings, you might not be able to communicate with the printer. To identify the problem, print a network summary.

  • If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure from the beginning.