Skip header
Help
 

Moving the Machine

This section describes precautions when moving the machine.

1Be sure to check the following points:

  • The power switch is turned off.

  • The power cord is unplugged from the wall outlet.

  • The interface cable is unplugged from the machine.

2If any external options are attached, remove them.

See the relevant sections in this manual and reverse the steps to remove options.

3Lift the machine by the inset grips on its sides.

At least four people are needed to lift the machine.

Moving the machine illustration

4Move the machine horizontally to the place where you want to install it.

5If you removed options, reattach them.

For details, see the relevant sections in this manual.

Note

  • Be sure to move the machine horizontally. To prevent toner from scattering, move the machine slowly.