Acceptable Original Sizes

This section describes the size and thickness limitations that apply to originals placed on the exposure glass or the ADF.

Original sizes and thickness

Where original is set	Acceptable original size	Maximum number of sheets	Paper thickness
Exposure glass	Up to A4 (210 × 297 mm), 8¹/₂ × 11 (216 × 279 mm)	1 sheet
ADF, one-sided original	A5 to A4 (up to 1,200 mm long) 5¹/₂ × 8¹/₂ to 8¹/₂ × 14	50 sheets: Less than 80 g/m² (21 lb. Bond)^*1	52 128 g/m² (14 34 lb. Bond)
ADF, two-sided original	A5 to A4 (up to 356 mm long) 5¹/₂ × 8¹/₂ to 8¹/₂ × 14	50 sheets: Less than 80 g/m² (21 lb. Bond)^*1	60 105 g/m² (16 28 lb. Bond)

Where original is set

Acceptable original size

Maximum number of sheets

Paper thickness

Exposure glass

Up to A4 (210 × 297 mm),

8¹/₂ × 11 (216 × 279 mm)

1 sheet

ADF, one-sided original

A5 to A4

(up to 1,200 mm long)

5¹/₂ × 8¹/₂ to 8¹/₂ × 14

50 sheets: Less than 80 g/m² (21 lb. Bond)^*1

52 128 g/m² (14 34 lb. Bond)

ADF, two-sided original

A5 to A4

(up to 356 mm long)

5¹/₂ × 8¹/₂ to 8¹/₂ × 14

50 sheets: Less than 80 g/m² (21 lb. Bond)^*1

60 105 g/m² (16 28 lb. Bond)

*1 Above specification depends on the paper type and condition

You can use documents longer than 356 mm (14 inches) with the User Parameter (switch 14, bit 1) in the Parameter Settings. For details about Parameter Setting, see “Parameter Settings”.