Setting Up as a Print Server (NetWare 4.x, 5 / 5.1, 6 / 6.5)

Follow the procedure below to connect the printer as a print server using NetWare 4.x, NetWare 5 / 5.1, or NetWare 6 / 6.5.

When using the printer as a print server in NetWare 4.x, NetWare 5 / 5.1, or NetWare 6 / 6.5, set it to the NDS mode.
When using NetWare 5 / 5.1 or NetWare 6 / 6.5, set the printer as a print server.

Log in to Web Image Monitor as an administrator.
For details about logging in, see Access in the Administrator Mode.
Click [Configuration] in the menu area, and then click [NetWare Print Settings].
Confirm the settings, and then click [Device Name].
Click [Logout].
Quit Web Image Monitor.

To check the configuration is correct, enter the following from the command prompt:
F:> USERLIST
If the printer works as configured, the name of the print server appears as a connected user.
If you cannot identify the printer you want to configure, check the printer name against the configuration page printed from the printer. For details about printing a configuration page, see Test Printing.
If no printer names appear in the list, match the frame types of IPX/SPX for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer.
For details about Web Image Monitor, see Using Web Image Monitor.