ManualsContentsPreviousNext |
This section explains about parameters that can be set on the paper input menu.
Only installed trays appear on the display panel.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
Paper Size: Bypass Tray
You can specify the paper size for Bypass Tray.
Default:
(mainly Europe and Asia)
A4
(mainly North America)
81/2 × 11
Paper Size: Tray 1 to 3
You can specify the paper size for Tray 1 to 3.
Default:
(mainly Europe and Asia)
A4
(mainly North America)
81/2 × 11
Paper Type: Bypass Tray
You can specify the paper type for Bypass Tray.
Default: [No Display (Plain Paper)]
Paper Type: Tray 1 to 3
You can specify the paper type for Tray 1 to 3.
Default: [No Display (Plain Paper)]
Duplex Tray
You can set each tray for duplex printing. Only installed trays appear on the display panel.
Tray 1 to 3, Bypass Tray
Default: [On]
On
Off
Auto Tray Select
You can select whether to assign each tray to automatically print the paper size and type set by printer driver.
When using custom size paper, if automatic tray selection is enabled, the size selected on the control panel has priority. If this setting is disabled, the size selected from the printer driver has priority.
You can select multiple trays.
If you need to have a tray locked, you must select the tray using both printer driver and control panel.
Tray 1 to 3, Bypass Tray
Default: [On]
On
Off
Tray Priority
You can set a tray to be checked first when automatic tray selection is enabled from the printer driver. The tray selected here is used when no tray is selected for a print job.
It is recommended that you load paper of the size and orientation you use most frequently in the tray selected in this setting.
Default: [Tray 1]
Tray 1
Tray 2
Tray 3
Bypass Tray
For details about which paper sizes can be specified, see "Supported Paper for Each Tray", Hardware Guide.
For details about which paper types can be specified, see "Supported Paper Types", Hardware Guide.