Quality Maintenance
Image Density Adjustment
Adjusting the print image density can prevent faint spots or smears appearing on printed pages. You can specify a density value between 
6 and 
3.
Only change this setting from its default value if necessary. For details about adjusting the print image density, see "Adjusting the Image Density", Hardware Guide.
Registration
You can adjust the starting position of the printing page. For details, see "Adjusting Printing Position", Hardware Guide.
Print Test Sheet
You can print the registration test sheet.
Only the installed trays appear on the display panel.
Tray 1
Tray 2
Tray 3
Bypass Tray
Duplex Unit
Adjustment
You can select the start position for printing on a page.
Only the installed trays appear on the display panel.
Horizontal: Tray 1
Horizontal: Tray 2
Horizontal: Tray 3
Horizontal: Bypass Tray
Horizontal: Back Side
Vertical: Std. Ppr Tray
Vertical: Opt. Ppr Tray
Vertical: Bypass Tray
Vertical: Back Side
Curl Prevention
You can control the fuser temperature to prevent paper from curling. Use this mode only when paper misfeed occurs frequently during duplex printing.
Default: [Off]
On
Off
