Menu Chart
This section explains how to change the default settings of the printer and provides information about the parameters included in each menu.
Memory Erase Status
Displays data status inside the memory.
This menu can be displayed only if all the following conditions are met:
The optional hard disk and the SD card provided with the hard disk are installed.
[Auto Erase Memory Setting] is enabled.
Paper Input
Menu |
|---|
Paper Size: Bypass Tray |
Paper Size: Tray 1 |
Paper Size: Tray 2 |
Paper Size: Tray 3 |
Paper Type: Bypass Tray |
Paper Type: Tray 1 |
Paper Type: Tray 2 |
Paper Type: Tray 3 |
Duplex Tray |
Auto Tray Select |
Tray Priority |
Only installed trays appear on the display panel.
Maintenance
Menu |
|---|
Quality Maintenance |
General Settings |
Timer Settings |
HDD Management |
Machine Settings Export |
[HDD Management] appears only when the hard disk is installed.
List/Test Print
Menu |
|---|
Multiple Lists |
Config. Page |
Error Log |
Network Summary |
Supply Info List |
Menu List |
PCL Config./Font Page |
PS Config./Font Page |
PDF Config./Font Page |
IPDS Font List |
Hex Dump |
System
Menu |
|---|
Print Error Report |
Auto Continue |
Memory Overflow |
Printer Language |
Sub Paper Size |
Default Printer Lang. |
Auto Off |
Auto Off Scheduler |
ECO Night Sensor |
Print Compressed Data |
Memory Usage |
Spool Printing |
RAM Disk |
Auto E-mail Notify |
[Spool Printing] appears only when the hard disk is installed.
[RAM Disk] appears only when the hard disk is not installed.
Print Settings
Menu |
|---|
Machine Modes |
PCL Menu |
PS Menu |
PDF Menu |
IPDS Menu |
Security Options
Menu |
|---|
Extended Security |
Service Mode Lock |
Firmware Version |
Network Security Level |
Auto Erase Memory Setting |
Erase All Memory |
Transfer Log Setting |
Machine Data Encryption |
[Service Mode Lock] may not appear depending on the setting of the printer.
[Auto Erase Memory Setting] and [Erase All Memory] will appear when the optional hard disk and the SD card provided with the hard disk are installed.
[Machine Data Encryption] will appear when the optional hard disk and the SD card provided with the hard disk are installed, and you have logged on as the machine administrator.
Host Interface
Menu |
|---|
I/O Buffer |
I/O Timeout |
Network |
Parallel Interface |
Wireless LAN |
USB Settings |
[Parallel Interface] appears when the optional IEEE 1284 interface board is installed.
[Wireless LAN] appears when the optional Wireless LAN interface unit is installed.
Shutdown
Prepares the printer for power off. To prevent damage to the hard disk or memory leading to malfunction, be sure to shutdown the printer properly before turning off the power switch.
For details about shutting down the printer, see "Turning off the Power", Hardware Guide.
Language
Menu |
|---|
English |
French |
German |
Italian |
Spanish |
Dutch |
Norwegian |
Danish |
Swedish |
Polish |
Portuguese |
Hungarian |
Czech |
Finnish |
Russian |
Extended Features
This menu is not available on the printer you are using.
