Removing Jammed Paper

This section describes how to locate and remove jammed paper.

Some of this machine's internal components get very hot. For this reason, take care when removing misfed paper. Not doing so could result in burns.

Keep your hands clear of the inside of the ring binder and the space under the ring binder tray. You can trap your fingers if you do not.

When clearing misfeeds, do not turn off the operation switch. If you do, your settings will be lost.
When removing jammed sheets, take care to touch only those areas explicitly indicated in the manual.
Do not remove the fusing unit. Doing so will result in loss of print quality.
To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
Contact your service representative if misfeeds occur frequently.
If the error message remains displayed even after you remove misfed paper, open and close the front cover.

Inside the front cover, there is a sticker explaining how to remove misfed paper.
If a detailed removal instruction appears on the right of the screen, follow it.
You can also use the procedure indicated in [System Status] to remove jammed paper.