![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Paper type and weight *1 |
Paper size |
Paper capacity *2, *3 |
---|---|---|
63.1 Paper Weight 2 |
*4 A3 |
200 sheets × 2 |
63.1 Paper Weight 2 |
*5 A5 13 × 191/5 |
200 sheets × 2 |
63.1 Paper Weight 2 |
*6 Custom size Vertical: 139.7 Horizontal: 139.7 |
200 sheets × 2 |
*1 For details about the basis for the weights for Paper Weight 1 to 7, refer to the table titled "Paper Thickness" in "Recommended Paper Sizes and Types", About This Machine.
*2 When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. For details, see "Loading Paper", About This Machine.
*3 Actual paper capacity might be lower than indicated here, depending on the paper type.
*4 The paper size is detected automatically.
*5 Select the paper size in Tray Paper Settings function. For details, see Tray Paper Settings.
*6 If you want to copy or print onto custom size paper, enter the paper size using the Tray Paper Settings function. See "Changing Tray paper Settings", Paper Settings Reference.
If multiple sheet feeding occurs, load sheets one by one.
If you load paper of the same size in two or more trays, the machine automatically shifts to the other tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However, if the paper type of one tray is recycled or special paper, the settings of the other trays must be the same for the Auto Tray Switching function to work.) This saves interrupting a copy run to replenish paper when making a large number of copies. You can set the paper type of the paper trays.
If the surface of the paper is dusty, white spots might appear on prints. To remove dust, fan the paper thoroughly.
Flatten out curled sheets before loading them.