Top Page > Options Reference > Troubleshooting > When You Have Problems Operating the Machine > High Capacity Stacker

High Capacity Stacker

Problem	Causes	Solutions
Paper delivered to the high capacity stacker is curled, causing it to not align properly.	Paper is curled.	When the paper is curled downward, select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators. When the paper is curled upward, select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators. For details about the Adjustment Settings for Operators, see "Adjustment Settings for Operations", Network and System Settings Reference.
Output paper to the stacker tray does not align properly.	When using coated paper, the output paper to the stacker tray might fail to align properly.	Select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators. For details about the Adjustment Settings for Operators, see "Adjustment Settings for Operations", Network and System Settings Reference.
Output paper to the stacker tray does not align properly.	When the paper weight is 280.0 g/m² or more, and the paper size is A3, SRA3 or larger, the output paper to the stacker tray might fail to align properly.	Select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators. For details about the Adjustment Settings for Operators, see "Adjustment Settings for Operations", Network and System Settings Reference.

Problem

Causes

Solutions

Paper delivered to the high capacity stacker is curled, causing it to not align properly.

Paper is curled.

When the paper is curled downward, select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators.
When the paper is curled upward, select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators.

For details about the Adjustment Settings for Operators, see "Adjustment Settings for Operations", Network and System Settings Reference.

Output paper to the stacker tray does not align properly.

When using coated paper, the output paper to the stacker tray might fail to align properly.

Select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators.

For details about the Adjustment Settings for Operators, see "Adjustment Settings for Operations", Network and System Settings Reference.

Output paper to the stacker tray does not align properly.

When the paper weight is 280.0 g/m² or more, and the paper size is A3, SRA3 or larger, the output paper to the stacker tray might fail to align properly.

Select [AdjustCurl: Weak] or [AdjustCurl: Strong] under [Adjust Paper Curl] in Adjustment Settings for Operators.

For details about the Adjustment Settings for Operators, see "Adjustment Settings for Operations", Network and System Settings Reference.