Top Page > About This Machine > Adding Toner and Staples > Replacing the Waste Toner Bottle

Replacing the Waste Toner Bottle

Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite on contact with naked flame.

Do not store toner (new or used) or toner containers anywhere near naked flames. Doing so risks fire and burns. Toner will ignite on contact with naked flame.

Do not crush or squeeze toner containers. Doing so can cause toner spillage, possibly resulting in dirtying of skin, clothing, and floor, and accidental ingestion.

Store toner (new or used), toner containers, and components that have been in contact with toner out of reach of children.

If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air environment. Consult a doctor if necessary.

If toner or used toner gets into your eyes, flush immediately with large amounts of water. Consult a doctor if necessary.

If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor if necessary.

When removing jammed paper or replacing toner, avoid getting toner (new or used) on your clothing. If toner comes into contact with your clothing, wash the stained area with cold water. Hot water will set the toner into the fabric and make removing the stain impossible.

When removing jammed paper or replacing toner, avoid getting toner (new or used) on your skin. If toner comes into contact with your skin, wash the affected area thoroughly with soap and water.

Waste toner bottles cannot be reused.
Before removing the waste toner bottle from the machine, spread paper or some other material around the area to keep toner from dirtying your workspace.

Replace the waste toner bottle if “Waste Toner Bottle is full. Replace Waste Toner Bottle.” appears on the display.

When the “Waste Toner Bottle is almost full.” appears on the display, the waste toner bottle should be replaced soon. Prepare a new waste toner bottle.