|
|
|
|
|
|
|
|
|
|
Always add toner when the machine instructs you.
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Store toner where it will not be exposed to direct sunlight, temperatures above 35 °C, or high humidity.
Store toner on a flat surface.
If the messages “Toner Cartridge is almost empty.” and “Check toner cartridge replacement(s).” appear cyclically, the toner has almost run out. Have a replacement toner cartridge at hand.
If appears when there is still toner in the cartridge, hold the cartridge with the opening upward, shake it well, and then reinstall it.
You can check the name of the required toner and the replacement procedure using the “Add Toner” screen.
Press [System Status] to check contact number where you can order supplies. See “Checking Machine Status and Settings”, Troubleshooting.
You can add all four colour toners in the same way.