Combined Copying

When placing originals on the exposure glass, start with the first page to be copied. When placing originals in the ADF, set the first page on top.

When placing originals on the exposure glass or in the ADF using the Batch function, press the [] key after all the originals have been scanned.

If you selected [2 Sided] for Original or [Combine 2 Sides] for Copy, you can change the orientation. See Originals and Copy Orientation.

You can change the initial settings for Combine under Edit in User Tools. For details, see Edit.

In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on copy paper sizes and the number of originals.

The machine selects reproduction ratios of between 25 400%.

If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the image might not be copied.

You cannot use custom size paper.

If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90 degrees to make copies properly.

If the number of originals placed is less than the number specified for combining, the last page segment is left blank as shown.