Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a malfunction.
Settings should be made in the following situations:
When placing originals consisting of more than 100 pages:
See Batch Mode.
When placing originals one by one:
See SADF Mode.
When copying originals of various sizes:
See Mixed Sizes Mode.
When placing custom size originals:
See Custom sizes.
Adjust the document guide to the original size.
Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
When originals are set in the ADF, the bottom plate rises automatically.
Limit mark
Document guide
Straighten curls in the originals before placing them on the ADF.
To prevent multiple sheets from being fed at once, fan the original before placing it on the ADF.
Set the original squarely.
Do not add paper to the ADF after the bottom plate has risen automatically.
 |
 | Copyright (C) 2011 |
