Skip header
 

Top Page > Troubleshooting > When the Machine Does Not Operate As Wanted > When the Output Z-folded Paper Is Less than the Stack Capacity > Finisher SR5030 or Booklet Finisher SR5040

Finisher SR5030 or Booklet Finisher SR5040

1Press the [Suspend/Resume] key.

Finisher illustration

2Remove the copies/prints.

3Set the Z-fold support tray for the finisher shift tray.

Attach the Z-fold support tray by inserting the two protrusions on its underside into the holes on the finisher shift tray.

Finisher shift tray illustration

4Press the [Suspend/Resume] key to restart the print.