Specifications for Ring Binder
This section describes specifications for the ring binder.
Paper size (ring binding/comb binding punching):
A4
, 81/2 × 11
Paper weight (ring binding/comb binding punching):
64.0 
216.0 g/m2 (17.1 lb. Bond 80.0 lb. Cover)
Ring binding capacity:
2 100 sheets
For paper between 80.1 216.0 g/m2 (21.1 lb. Bond 80.0 lb. Cover), the ring binding capacity is one-third that of 80.0 g/m2 (20.0 lb. bond) paper.
Capacity of the ring comb cartridge:
80 ring combs
Ring comb type:
50-sheet type (white, black), 100-sheet type (white, black)
Comb binding punch capacity:
50 sheets
Comb binding punch holes:
23 holes, 21 holes
Ring binder tray capacity:
51 to 100 leaf binding: 11 sets
In comb binding punch mode: 50 sheets
Power source:
120 V, 60 Hz, 2.8 A
Power consumption:
Maximum 400 W (A separate power source is required.)
Dimensions (W × D × H):
870 × 730 × 1,010 mm (34.3 × 28.8 × 39.8 inches)
Weight:
140 kg (308.7 lb.) or less
You can apply 23-hole ring binding or punching to A4 sheets only if the A4 punch unit is installed.
You can apply 21-hole ring binding or punching to 81/2 × 11 sheets only if the letter punch unit is installed.
