Skip header
 

Top Page > Options Reference > Getting Started > Recommended Paper Sizes and Types > Interposer

Interposer

Paper type and weight *1

Paper size

Paper capacity *2, *3

63.1 hyphen 216.0 g/m2

Paper Weight 2 hyphen Paper Weight 5

*4

A3Landscape, A4Portrait, A5Landscape, B4 JISLandscape, B5 JISPortrait, 12 × 18Landscape, 11 × 17Landscape, 81/2 × 11PortraitLandscape, 8 × 13Landscape, 51/2 × 81/2PortraitLandscape

200 sheets × 2

63.1 hyphen 216.0 g/m2

Paper Weight 2 hyphen Paper Weight 5

*5

A4Landscape, A5Portrait, B5 JISLandscape, SRA3Landscape, SRA4PortraitLandscape, 210 × 340mmLandscape, 182 × 210mmPortraitLandscape, 170 × 210mmPortraitLandscape, 13 × 191/5Landscape, 13 × 19Landscape, 13 × 18Landscape, 123/5 × 191/5Landscape, 123/5 × 181/2Landscape, 11 × 15Landscape, 11 × 14Landscape, 10 × 15Landscape, 10 × 14Landscape, 81/2 × 14Landscape, 81/2 × 13Landscape, 81/4 × 14Landscape, 81/4 × 13Landscape, 8 × 101/2PortraitLandscape, 8 × 10PortraitLandscape, 71/4 × 101/2PortraitLandscape, 8KLandscape, 16KPortraitLandscape

200 sheets × 2

63.1 hyphen 216.0 g/m2

Paper Weight 2 hyphen Paper Weight 5

*6

Custom size

Vertical: 5.50 hyphen 13.00 inches

Horizontal: 5.50 hyphen 19.20 inches

200 sheets × 2

*1 For details about the basis for the weights for Paper Weight 1 to 7, refer to the table titled "Paper Thickness" in "Recommended Paper Sizes and Types", About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

*2 When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. For details, see "Loading Paper", About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

*3 Actual paper capacity might be lower than indicated here, depending on the paper type.

*4 The paper size is detected automatically.

*5 Select the paper size in Tray Paper Settings function. For details, see Tray Paper Settings.

*6 If you want to copy or print onto custom size paper, enter the paper size using the Tray Paper Settings function. See "Changing Tray paper Settings", Paper Settings ReferenceIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

Note

  • If multiple sheet feeding occurs, load sheets one by one.

  • If you load paper of the same size in two or more trays, the machine automatically shifts to the other tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However, if the paper type of one tray is recycled or special paper, the settings of the other trays must be the same for the Auto Tray Switching function to work.) This saves interrupting a copy run to replenish paper when making a large number of copies. You can set the paper type of the paper trays.

  • If the surface of the paper is dusty, white spots might appear on prints. To remove dust, fan the paper thoroughly.

  • Flatten out curled sheets before loading them.