Adjust the horizontal position of the punch holes when using Finisher SR5030 or Booklet Finisher SR5040.
Press [] to move the position toward the top edge (left) relative to the paper feed direction, or [] to move it toward the bottom edge (right).
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
2 Holes Type JP / EU 3 Holes Type US 4 Holes Type EU 4 Holes Type NE 2 Holes Type US |
0.0 |
4.0 |
4.0 |
0.5 |
mm |