Use the "netware" command to view and configure the NetWare settings such as the file server name.
NetWare File Server Names
msh> netware fname "character string"
Enter the NetWare file server name using up to 47 characters.
Encap type
msh> netware encap {802.3|802.2|snap|ethernet2|auto}
SAP interval
msh> netware sap_interval [0-3600]
It can be entered between 0 and 3600 seconds.
Setting login mode for file server
msh> netware login server
Setting login mode for NDS tree
msh> netware login tree
Setting login mode for NDS tree name
msh> netware tree "NDS tree name"
File transfer protocol
msh> netware trans {ipv4pri|ipxpri|ipv4|ipx}
If you do not specify the protocol, the current setting is displayed.
Protocol |
Set Protocol |
---|---|
ipv4pri |
IPv4+IPX(IPv4) |
ipxpri |
IPv4+IPX(IPX) |
ipv4 |
IPv4 |
ipx |
IPX |