Network Settings Required to Use Network TWAIN Scanner
This section lists the network settings required for using the TWAIN Scanner under the network environment.
For details about how to specify the settings, see Interface Settings
.
These settings should be made by the administrator, or with the advice of the administrator.
Menu |
User Tool |
Setting Requirements |
|---|---|---|
Interface Settings/Network |
Machine IPv4 Address |
Necessary |
Interface Settings/Network |
IPv4 Gateway Address |
As required |
Interface Settings/Network |
DNS Configuration |
As required |
Interface Settings/Network |
DDNS Configuration |
As required |
Interface Settings/Network |
IPsec |
As required |
Interface Settings/Network |
Domain Name |
As required |
Interface Settings/Network |
WINS Configuration |
As required |
Interface Settings/Network |
Effective Protocol |
Necessary |
Interface Settings/Network |
Ethernet Speed |
As required |
Interface Settings/Network |
Permit SNMPv3 Communication |
As required |
Interface Settings/Network |
Permit SSL / TLS Communication |
As required |
Interface Settings/Network |
Host Name |
As required |
Interface Settings/Network |
IEEE 802.1X Authentication for Ethernet |
As required |
In [Effective Protocol], check that the protocol you want to use is set to [Active].
