To reduce its power consumption, this machine has the following functions:
Low Power Mode
If this machine remains idle for a specified period, it automatically reduces its electrical consumption.
The default period the machine waits before entering Low Power Mode is 15 minutes. This default time can be changed.
Sleep Mode
If this machine is already in Low Power Mode and remains idle for a specified period, it automatically enters Sleep Mode to further reduce its electrical consumption.
The default delay time the machine waits before entering Sleep Mode is 60 minutes. This default time can be changed.
The machine can print jobs from computers while in Sleep Mode.
Specification
Type 1 |
Type 2 |
|
---|---|---|
Reduced Electrical Consumption by Low Power Mode |
400 W or less |
400 W or less |
Time of Switch into Low Power Mode |
15 minutes |
15 minutes |
Time of Switch out from Low Power Mode |
100 seconds or less |
100 seconds or less |
Reduced Electrical Consumption by Sleep Mode |
20 W or less |
20 W or less |
Time of Switch into Sleep Mode |
60 minutes |
60 minutes |
Time of Switch out from Sleep Mode |
300 seconds or less |
300 seconds or less |
Specifications can vary depending on which options are installed on the machine.
For details about how to change the default interval, see “Timer Settings”, Network and System Settings Reference.
Depending on which Embedded Software Architecture application is installed on it, the machine might take longer than indicated to enter Sleep Mode.