This section describes the user tools in the Stamp Text menu under Stamp.
Font
You can select the font in stamp text mode.
Default: [Font 1]
Size
You can set the stamp text size.
Default: [Auto]
Superimpose
You can have the stamp text printed in white when it overlaps black parts of the image.
Default: [Off]
Stamp Color
Sets the selected priority color when printing the text.
Default: [Black]
Stamp Setting
Specify how stamp text is printed.
Stamp Position
Specify where to print the Stamp Text.
Default: [Top Right]
Adjust Stamp Position
You can adjust the print position of the Stamp Text within the available ranges as shown below.
“Top Left” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Top Center” T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
“Top Right” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Bottom Left” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Bottom Center” T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
“Bottom Right” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as shown below.
Top-Bottom: Top 17.0 inches Bottom 17.0 inches
Left-Right: Left 17.0 inches Right 17.0 inches
Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Default: [All Pages]