Skip header
 

About the Scanner Functions

This section describes functions you can use in the scanner mode.

You can use the scanner functions to send scan files to computers, to scan originals from a computer using the TWAIN driver, and to save scan files on a removable memory device.

For details about each function, see respective chapters.

Sending scanned files (Network Scanner)

Scan files can be sent to or stored on a computer, and you can specify the format of a scan file according to how the file will be used.

  • Sending by e-mail

    You can send scan files to specified e-mail addresses.

    For details, see chapter 1 "Sending Scan Files by E-mail".

  • Sending to folders

    Scan files can be stored in shared network folders, or on FTP or Netware servers.

    For details, see chapter 2 "Sending Scan Files to Folders".

  • Sending using WSD (Push Type)

    You can use Web Services on Devices (WSD) to send scan files to a client computer.

    For details, see chapter 3 "Sending Scan Files Using WSD".

  • Delivering

    You can deliver scan files using a delivery server.

    For details, see chapter 5 "Delivering Scan Files".

Scanning originals from a client computer

  • WSD (Pull Type)

    You can use the WSD scanner function to scan files from a networked or directly connected computer.

    For details, see chapter 3 "Sending Scan Files Using WSD".

  • TWAIN scanner

    You can use the TWAIN driver to scan files from a networked or directly connected computer.

    For details, see chapter 6 "Scanning Originals with the Network TWAIN Scanner".

Saving files

You can save scan files on a removable memory device such as a USB memory stick or an SD card.

For details, see chapter 4 "Saving Scan Files on a Removable Memory Device".

Note

  • This machine’s scanner functions are only available as the network functions. They are not available through direct (USB) connection.