Skip header
 

Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003 / 2003 R2)

Important

  • Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.

  • In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the DeskTop Binder-SmartDeviceMonitor port.

  • You can install the printer driver from the CD-ROM provided with this machine or download it from the supplier's Web site.

  • If your operating system is Windows XP Professional x64, Windows Server 2003 / 2003 R2 x64, you must download the printer driver from the manufacturer's Web site. Select this printer and the operating system you are using, and then download it.

1Quit all applications currently running.

2Insert the CD-ROM into the CD-ROM drive.

The installer starts.

3Select an interface language, and then click [OK].

The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

4Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

5Click [Next >].

6Click [Local printer attached to this printer], and then click [Next >].

7Click [Create a new port:].

8Click [Standard TCP/IP Port] in [Create a new port], and then click [Next >].

9Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

10Enter the printer name or IP address in the [Printer Name or IP Address] box.

The [Port Name] text box automatically obtains a port name. Change this name if necessary.

When screen for Device selection appears, select “RICOH NetworkPrinter Driver C Model”.

11Click [Next >].

12Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

13Check that the name of the machine whose driver you want to install is selected, and then click [Next >].

14Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

15Specify whether or not to print a test page, and then click [Next >].

16Click [Finish].

The printer driver installation starts.

Note

  • A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.

  • Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on the CD-ROM root directory.