ManualsContentsPreviousNext |
This section describes the user tools in the System menu under Printer Features.
Print Error Report
Select this to have an error report printed when a printer or memory error occurs.
The default setting is [Off].
Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues after a system error occurs.
The default setting is [Off].
Memory Overflow
Select this to have a memory overflow error report printed.
The default setting is [Do not print].
Rotate by 180 Degrees
Specify whether to rotate the print image 180 degrees relative to the paper orientation.
The default setting is [Off].
Auto Delete Temporary Jobs
You can select to automatically delete print jobs temporarily stored in the machine.
The default setting is [Off].
If you select [On], you can set up to 200 hours for auto file deleting.
Auto Delete Stored Jobs
You can select to automatically delete print jobs stored in the machine.
The default setting is [On], “3” day(s).
If you select [On], you can set up to 180 days for auto file deleting.
Print Compressed Data
Specify whether to uncompress and extract compressed job data before printing it.
The supported compression format is GZIP.
The default setting is [Off].
Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority, according to paper size or resolution.
Duplex
You can select to have print on both sides of each page.
The default setting is [Off].
Copies
You can specify the number of print sets. This setting is disabled if the number of pages to print has been specified with the printer driver or another command.
The number of copies can be specified from 1 to 999 by increments of one.
The default setting is “1” copies.
Blank Page Print
You can select whether or not to print blank pages.
The default setting is [On].
Pages that match one of the following conditions are identified as blank.
There are no images.
There are images but they are outside the printable area.
There are only blank characters.
Edge Smoothing
Set this to enable Edge Smoothing.
The default setting is [On].
If Toner Saving is set to On, Edge
Smoothing is ignored even if it is set to On.
Toner Saving
Set this to enable Toner Saving.
The default setting is [Off].
Printer Language
Specify the printer language.
The default setting is [Auto].
Sub Paper Size
You can enable the Auto Substitute Paper Size (A4, LT) feature.
The default setting is [Auto].
Page Size
You can select the default paper size.
The paper size you can select is as follows:
A4, A5 , B5 JIS, C5 Env, C6 Env, DL Env, 81/214, 81/213, 81/211, 81/413, 813, 71/4101/2, 51/281/2, 41/89 1/2, 3 7/871/2, 16K, Custom Size
The default setting is A4.
The default setting is 81/211.
Letterhead Setting
You can rotate original images when printing.
When printing, original images are always rotated by 180 degrees. Therefore, output might not be as expected when printing onto letterhead or preprinted paper requiring orientation. Using this function, you can specify image rotation.
The default setting is [Auto Detect].
Off
When set to [Off], original images are rotated by 180 degrees.
Auto Detect
When set to [Auto Detect], the machine detects a letterhead or preprinted paper automatically, and does not rotate the image.
On (Always)
When set to [On (Always)], the machine does not rotate.
This function reduces printing speed.
Bypass Tray Priority
Specify whether (Printer) Driver/Command or Machine Settings, has priority for determining the paper size for the bypass tray.
The default setting is [Driver/Command].
Edge to Edge Print
You can select whether or not to print on the entire sheet.
The default setting is [Off].
Default Printer Lang.
You can set the default printer language if the machine cannot find the printer language automatically.
The default setting is [PCL].
Tray Switching
You can specify whether or not the machine automatically switches paper trays if paper of the specified size and type is not loaded in the driver-designated tray.
The default setting is [Off].
RAM Disk
You can change the settings of the RAM disk.
This menu appears only when the optional hard disk is not installed.
Extend Auto Tray Switching
This setting enables the machine to switch paper trays automatically, regardless of whether the tray is manually or automatically selected.
When set to [On], [Auto Tray Switching] is enabled and the [Auto Tray Switching] setting configured in the printer driver is overridden.
The default setting is [Off].