Skip header
 

Installing the PCL printer driver

1Quit all applications currently running.

2Insert the CD-ROM into the CD-ROM drive.

The installer starts.

3Select an interface language, and then click [OK].

4Click [PCL Printer Driver].

5The software license agreement appears in the [License Agreement] dialog box.

After reading the agreement, click [I accept the agreement.], and then click [Next >].

6Select a printer driver you want to use in the [Select Program] dialog box.

You can select several printer drivers.

The PCL6 printer driver is installed in the language specified by your operating system.

7Click [Next >].

8Select the printer model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name'] box.

9Double-click the printer name to display the printer settings.

The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.

10Click [Port], and then click [Add].

11Click [Standard TCP/IP Port], and then click [OK].

Configure the Standard TCP/IP port settings, and then see Windows Help if [Standard TCP/IP Port] does not appear.

12Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

13Enter the printer name or IP address in the [Printer Name or IP Address] box.

The [Port Name] text box automatically obtains a port name. Change this name if necessary.

When the device selection appears, select "RICOH NetworkPrinter Driver C Model".

14Click [Next >].

15Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

The installation start dialog box reappears.

16Check that the port of the selected printer is displayed in [Port].

17Configure the default printer as necessary.

18Click [Continue].

The printer driver installation starts.

19After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Restart the computer to complete installation.

Note

  • To stop installation of the selected software, click [Cancel] before installation is complete.

  • Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.

  • A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See "Messages Displayed When Installing the Printer Driver", Trouble Shooting.