Skip header
 

Installing the PCL printer driver (IPP)

1Quit all applications currently running.

2Insert the CD-ROM into the CD-ROM drive.

The installer starts.

3Select an interface language, and then click [OK].

4Click [PCL Printer Driver].

5The software license agreement appears in the [License Agreement] dialog box.

After reading the agreement, click [I accept the agreement.], and then click [Next >].

6Select a printer driver you want to use in the [Select Program] dialog box.

You can select several printer drivers.

The PCL6 printer driver is installed in the language specified by your operating system.

7Click [Next >].

8Select the printer model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name'] box.

9Double-click the printer name to display the printer settings.

The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.

10Click [Port], and then click [Add].

11Click [SmartDeviceMonitor], and then click [OK].

12Click [IPP].

13In the [Printer URL] box, enter "http://printer's IP address/printer" as the printer's address.

If the server authentication is issued, to enable SSL (a protocol for encrypted communication), enter "https://printer's IP address/printer" (Internet Explorer 5.01, or a higher version must be installed). (example IP address: 192.168.15.16)

http://192.168.15.16/printer

https://192.168.15.16/printer

You can enter "http://printer's IP address/ipp" as the printer's address.

14Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing ports.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

15Click [Detailed Settings] to make necessary settings.

For details about the settings, see SmartDeviceMonitor for Client Help.

16Click [OK].

17Check that the port of the selected printer is displayed in [Port].

18Set a user code, if necessary.

Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.

19Select the [Default Printer] check box to configure the printer as default.

20Click [Continue].

Installation starts.

21After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Restart the computer to complete installation.

Note

  • To stop installation of the selected software, click [Cancel] before installation is complete.

  • Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.

  • Setting a user code allows a SmartDeviceMonitor for Admin user to display and check the number of sheets each user prints. For details, see SmartDeviceMonitor for Admin Help.

  • A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See "Messages Displayed When Installing the Printer Driver", Trouble Shooting.