Skip headerimage
ManualsContentsPreviousNextHelp

Printer Status Notification by E-Mail

Whenever a paper tray becomes empty or paper is jammed, an e-mail alert is issued to the registered addresses to notify the printer status.

For this notification, you can make the e-mail notification settings.

Notification timing and e-mail content can be set.

Important

The e-mail notification functions you can set are as follows:

The information that can be notified by auto e-mail notification is as follows:

  1. Log on to Web Image Monitor in administrator mode.

  2. In the menu area, click [Configuration].

  3. Click [E-mail] on the [Device Settings] area.

  4. Make the following settings:

    • Items in the Reception column: Make the necessary settings for sending and receiving e-mail.

    • Items in the SMTP column: Configure the SMTP server. Check your mailing environment, and then specify the necessary items. You can also perform mail authentication for the SMTP server.

    • Items in the POP before SMTP column: Configure the POP server. Check your mailing environment, and then specify the necessary items. You can also perform mail authentication for the POP server.

    • Items in the POP3/IMAP4 column: Configure the POP3 or IMAP4 server. Check your mailing environment, and then specify the necessary items.

    • Items in the E-mail Communication Port column: Configure the port to be used for access to the mail server.

    • Items in the Fax E-mail Account

    • Fax E-Mail Account column: Specify these items if you want to use on-demand e-mail notification.

    • Items in the E-mail Notification Account column: Specify these items If you want to use e-mail notification.

  5. Click [OK].

  6. Click [Logout].

  7. Quit Web Image Monitor.

Note

Reference

Related topics

Setting the Account for E-mail Notification
Mail Authentication
Auto E-mail Notification
On-demand E-mail Notification
Format of On-demand E-mail Messages